To change either the Date or the Time on the Legend system, you must program it from the main System Programming console (MLX-20L).  This will change the Time or Date on all the display phones throughout the system, except the ATL (Analog) display sets.  These phones must be programmed on each individual set.

How to change the Date in the Legend system:

1. Press Menu.
2. Press System Program.
3. Press Exit.
4. Press System.
5. Press Date.
6. Enter date in following format: mmddyy (where MM is the month, DD is the day, and YY is the year).
7. Press Enter.
8. Press Exit.
9. Press Home to exit programming mode.

How to change the Time in the Legend system:

1. Press Menu.
2. Press System Program.
3. Press Exit
4. Press System.
5. Press Time.
6. Enter the time in military/24 hour format: HH:MM (where HH is the hour, 01-24, and MM is minutes, 00-60).
7. Press Enter.
8. Press Exit
9. Press Home to exit programming mode.

To change the date, day or time on an ATL set:

All ATL display telephones have the ability to show the time, day, and date on the display.

Note:  When you touch the Set button the first time, you will see the word ALARM in the display screen. If the Alarm is not to be set, press the Set button two more times until just the Hours and the A or P (A - AM, P - PM) are flashing in the display window. If you do not need to set a particular item, press Set to bypass it.

1. Press Set until the item you want to change flashes.
2. Press Fwd or Rev to advance or reverse the Time, Day or Date.
3. When you have the correct Time, Day or Date, press Set.
4. If you only want to set a particular item, such as Time, Day, or Date, press Exit after programming it.
5. If you have programmed them all (Time, Day and Date) just press Set not Exit. (If you press Exit, you will see four zeroes in the place of the Date. This is for the Timer. Press Exit again to display the corrected Time, Day and Date.) xt